Contents: Removal ↡ Installation ↡
Removal
1. Place the front of the car on stands.
2. Unscrew the supports (22b) on both sides of the bottom and on the suspension arms. Mark the position of the clamps for installation with paint beforehand.
3. Remove the stabilizer together with the rubber supports.
[Original source of information: MercedesMan]
Installation
1. Before installation, check the rubber supports, if they are porous or cracked, replace them.
2. Place the rubber mount clamps in the same position as before removal and secure with new self-locking bolts (22c) to a torque of 20 Nm.