Contents: Removal ↡ Installation ↡
Removal
1. Remove the wheels.
2. Disconnect the brake lines and brake pad wear indicator wiring from the shock absorber strut 1 (see figure 7.1).
Figure 7.1. Removing and installing the front suspension:
1. Shock absorber strut,
2, 4. Nut M14,
3. Eccentric bolt M14x70 with nut M14,
5. Operating counter,
6. Nut.
3. Disconnect the wiring from the ABS sensors.
4. Unscrew nut 6 from stabilizer strut 5.
5. Remove the air intake if the left front wheel suspension will be removed.
6. Unscrew nut 2 securing the shock absorber strut to the body.
7. Unscrew bolts 3 and 4 securing the shock absorber strut to the steering knuckle and disconnect it.
Installation
8. Installation is carried out in the reverse order of removal.
(Article text obtained from the website www.mercedesman.ru)