Contents: Removal ↡ Installation ↡
Front Suspension Component Installation Details
Removal
1. Remove the front wheels.
2. Install the protective plates for the rubber boots of the brake calipers.
3. Remove the front springs.
4. Disconnect connectors (X62/6) or (X62/7).
5. Disconnect the connector (Y10/1) at the front left of the P-valve.
6. On models with automatic differential lock ASD, disconnect the connection from the damper valve (Y51/12).
7. Remove all plastic front suspension covers.
8. Raise the engine.
9. Disconnect the anti-roll bar mounting bracket (21b).
10. Unscrew the brake pipe (39) from the brake line.
11. Disconnect the steering knuckle (5) from the upper arm.
12. Remove the heat shield (31a) on the steering gear.
13. Raise the front suspension brackets.
14. Disconnect the engine mounts from the front suspension.
15. Remove the plastic cover (21g), detach the front beam (1) and remove the brackets (21).
16. Disconnect the pressure (29) and return (28) pipes.
17. Lower the front suspension brackets.
18. Remove the upper arm.
Installation
Installation is carried out in the reverse order of removal.
Article based on data from the website [MERCEDESMAN]