Front wheel bearing clearance adjustment
9d - Nut; 9e - Hub cover; 9i, 48a - Bolts; 015 - Indicator support; 022 - Indicator
1. Remove the front wheel.
2. Screw in the bolt (48a) wheel fasteners.
3. Block the front brake disc with the brake caliper by depressing the brake pedal.
4. Remove the cover (9e) hubs.
5. Loosen the nut (9d).
6. Attach indicator (022) with support (015).
7. Adjust the clearance in the wheel bearing by turning the nut (arrow) in the right direction. The nominal value of the clearance in the front wheel bearing is 0.01-0.02 mm.
8. Tighten the bolt (91) and check the gap again.
9. Depress the brake pedal several times.