Contents: Removal ↡ Installation ↡
Removal
1. Disconnect axle shaft 2 from left flange 1 (see figure 7.11).
Figure 7.11. Left flange of the gearbox:
1. Flange,
2. Half shaft,
3. Retaining ring.
2. Unscrew the nut securing the stabilizer to the shock absorber strut.
3. Remove flange 1.
Installation
4. Installation is carried out in the reverse order of removal. Replace retaining ring 3. Press in the flange until retaining ring 3 is positioned in the gearbox. Replace the self-locking nut.