Contents: Removal ↡ Installation ↡
Removal
1. Turn off the ignition.
2. Disconnect the wiring connector B73.1 of the crankshaft position sensor (see figure 5.65).
Figure 5.65. Crankshaft position sensor:
1. Bolt,
B73. Crankshaft position sensor,
B73.1. Crankshaft position sensor wiring connector.
3. Unscrew bolt 1.
4. Remove the crankshaft position sensor B73.
Installation
5. Installation is carried out in the reverse order of removal.
(Original article is on the portal MercedesMAN)