Contents: Examination ↡ Adjustment ↡
Examination
1. Loosen and unscrew bolt 3 (figure 7.12).
2. Lock lever 1 with locking pin 2.
3. Measure the distance A from the end of the spring drive to the center of the fork hole. It should be: 137 + 2 mm.
Adjustment
4. Tighten the parking brake lever.
5. Press cover 7 inwards.
6. Loosen nuts 9.
7. Release the parking brake lever.
8. Set the required distance A by rotating fork 6.
9. Tighten the parking brake lever.
10. Tighten nuts 9.
11. Install all previously removed elements.
Article text obtained from the website MERCEDESMAN
Figure 7.12. Adjusting the parking brake system drive: 1 - Lever; 2 - Locking finger (diameter 2.5 mm); 3 - Bolt; 4 - Gasket; 5 - Cotter pin; b - Fork; 7 - Cover: 8 - Spring brake cylinder; 9 - Nuts.