Removal
1. Disconnect the wiring from the brake fluid level sensor on the brake fluid reservoir cap.
2. Remove the brake master cylinder.
3. Disconnect the vacuum tube (figure 7.1).
Figure 7.1. Disconnect the vacuum tube.
4. Remove the cover above the pedals (figure 7.2).
Figure 7.2. Remove the cover above the pedals.
5. Disconnect the thrust rod from the brake pedal (figure 7.3).
Figure 7.3. Disconnect the thrust rod from the brake pedal.
6. Remove the brake booster (figure 7.4). When installing, use only new mounting bolts.
Figure 7.4. Remove the brake booster. When installing, use only new mounting bolts.
(Original can be found on the website: «MercedesMAN.ru»)