Shock absorber strut (Mercedes-Benz Vito W639)

The composition of the shock absorber strut and the assembly sequence are shown in Figure VN 5.009.

VN 5.009 1. Shock absorber; 2. Nut; 3. Washer; 4. Washer; 5. Lower cushion for mounting the rod to the body; 6. Front suspension spring; 7. Bumper; 8. Upper cushion for fastening the rod to the body; 9. Protective tube; 10. Thrust washer; 11. Nut; 12. Bracket; 13. Brake pipe mounting bracket; 14. Nut; 15. Bolt; 16. Bolt; 17. Nut

VN 5.010 1. Shock absorber; 2. Upper shock absorber mounting nut (66 Nm); z. Washer; 4. Rubber insert; 5. Washer; 6. Protective tube; 7. Spring; 8. Spring cuff; 9. Shock absorber rod

This article is available at: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

The article has been verified: Lukyanov Nikita Ilyich

Share with friends:

◀ Previous

Mercedes Vito 2 / Front suspension

Next ▶

Fastening the stabilizer bar
Anti-roll bar
Fastening the steering knuckle to the shock absorber strut
Front control arm and steering knuckle
Front suspension arm

General information on checking wheel alignment angles
Checking and adjusting the front wheel alignment
Checking and adjusting the camber and longitudinal tilt of the wheel pivot axis

More similar articles for repairing other models