2. Remove the wire retainer (4).
3. Press out the brake master cylinder rod axle (3). When installing, lubricate the brake master cylinder rod axle.
4. Unscrew the nut (6) securing the pedal to the bracket. When assembling, the nut must be tightened to a torque of 30 Nm.
5. Remove the brake pedal (1).
6. Install in reverse order.
VN 7.004 1. Brake pedal; 2. Brake pedal return spring; 3. Master cylinder fork shaft axis; 4. Cotter pin; 5. Pedal protective rubber; 6. Nut of the articulation axis of the brake pedal and bracket
Article was obtained from the portal [MercedesMan]