Foot brake pedal installation details
1 - Cover on the left under the instrument panel; 2 - Connector; 3 - Master cylinder pusher mounting pin; 4 - Cotter pin; 5 - Spring; 6 - Retaining ring; 7 - Spacers; 8 - Pedal; S9/1 - Brake light switch sensor
1. Remove the cover (1) on the left under the instrument panel.
2. Disconnect the electrical wiring connector (2) and remove the brake light switch sensor (S9/1).
3. Remove the cotter pin (4) and take out the pin securing the master cylinder pusher (3) to the pedal lever (8).
4. Disconnect the spring (5).
5. Remove the retaining ring (6).
6. Remove the spacer washer (7) and take out the axle bushing.
7. Remove the foot brake pedal (8).
8. Installation is carried out in reverse order.