Removal and installation the upper bumper trim (Mercedes-Benz Vito W639)

1. Remove the front bumper (4).

2. Remove the pins (2) and unclip the cover (1) from the bumper (4).

3. Installation is carried out in reverse order.

VN 8.005 1. Front pad; 2. Pistons; 3. Retainer; 4. Bumper

VN 8.006 1. Sheathing; 2-4. Bolts; 5. Front panel support crossmember; 6. Ambient temperature sensor connector (B14)

Publication taken from an online resource: mercedesman.ru

This article is available at: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

The article has been verified: Lukyanov Nikita Ilyich

Share with friends:

◀ Previous

Mercedes Vito 2 / Body elements

Next ▶

Removal and installation the front bumper
Removal and installation the radiator grille
Removal and installation mudguards
Removal and installation the hood
Vito Viano car body

Removal and installation the front panel support crossmember
Removal and installation the external rearview mirror
Removal and installation the front wing
Removal and installation the fuel tank flap
Removal and installation rear bumper corners

More similar articles for repairing other models

☛ Interior trim Mercedes W168 (1997-2004)
☛ Interior door trim — removal and installation Mercedes W202 (1993-2000)
☛ Removal and installation the upper suspension arm Mercedes W123 (1976-1985)
☛ Removal and installation the upper hatch cover trim panel Mercedes W463 (1999-2019)
☛ Removal and installation the upper wishbone Mercedes W163 (1997-2005)
☛ Removal and installation the upper front covers Mercedes W140 (1991-1998)

Link in different formats to this article

TEXTHTMLBB Code

Comments and feedback from visitors

No comments yet

Vito 1 (1996-2003)