Contents: Removal ↡ Installation ↡
Removal
1. Disconnect the negative cable from the battery.
2. Disconnect connector 1 from control unit 2 by lightly pressing spring 3 (see figure 4.58).
Figure 4.58. Fuel injection control system control unit:
1. Wiring connector,
2. Control unit,
3. Spring,
4. Plate,
5. Bracket.
3. Unhook plate 4 of control unit 2 from bracket 5.
4. Remove control unit 2 from bracket 5.
Installation
5. Installation is carried out in the reverse order of removal.
Publication reprinted from this resource: MercedesMan