Contents: Removal ↡ Installation ↡
Removal
1. Disconnect wiring connector 1 from pressure sensor B47 (see figure 4.55).
Figure 4.55. Incoming and compressed air pressure sensor:
1. Wiring connector,
2. Tube,
3. Bolt,
4. Bracket,
B47. Incoming and compressed air pressure sensor.
2. Remove the tube mounting clamp 2.
3. Disconnect tube 2 from the pressure sensor.
4. Unscrew bolt 3 securing pressure sensor B47 to bracket 4.
5. Remove the B47 pressure sensor from the bracket.
Installation
6. Installation is carried out in the reverse order of removal.