- move the selector to position P, place the car on supports;
- unscrew the drain plug in the crankcase and drain the liquid as described above;
Pic. 345. Removing the oil pan automatic gearbox: 1 - gasket; 2 - pallet bolts; 3 - oil pan
- unscrew bolts 2 (pic. 345) and remove the pan 3 crankcase. Remove gasket 1;
- thoroughly clean the pan and install in the reverse order of removal, with a new gasket. Tighten the fastening bolts to 7 Nm;
- tighten the drain plug to 14 Nm and fill in the liquid as described earlier.