Oil supply pipe connecting tip
1. Disconnect the wire from the negative battery terminal.
2. Remove the lower instrument panel shield.
3. Push out the instrument cluster with pressure from behind.
4. Release the speedometer drive flexible shaft from the plastic clips in the engine compartment.
5. Loosen the knurled nut and disconnect the speedometer drive shaft from the instrument cluster.
6. Disconnect the multi-pin wiring connectors and individual wires, securing their position.
7. Unscrew the union nut and disconnect the oil pressure supply tube from the indicator, install the plugs.
8. Remove the instrument cluster from the dashboard.
9. Oil supply pipe connecting tip
10. Installation is carried out in the reverse order of removal.