2. Disconnect the wires from the lamp, and then release the spring latch or turn the lamp socket and remove it. In this case, do not touch the bulb of the lamp with your fingers. If you do touch it, wipe the cone with denatured alcohol.
Latch of fastening of a fog lamp | Latch of fastening of a conventional headlight |
3. To remove the headlight, first remove the direction indicator, and then unscrew the side screws securing the headlight.
4. Turn away internal screws of fastening and remove the block headlight from the car.
5. To disassemble the headlight, release its latches and remove the glass.
6. Remove bezel panel.
Swivel headlight pin
7. Release the latches and vacuum corrector and remove the reflectors.
Vacuum headlight corrector | Connecting the headlight to the vacuum corrector lever |
8. Installation is made in an order, the return to removal.