Contents: Removal ↡ Installation ↡
Removal
1. Remove the gearbox.
2. Remove the clutch.
3. Install the locking device 7 on the flywheel ring (see figure 4.30).
Figure 4.30. Flywheel:
1. Bolt,
2. Disk,
3. Cylindrical finger,
4. Flywheel,
5. Leading disk,
6. Key,
7. Locking device.
4. Unscrew the flywheel mounting bolts 1.
5. Remove flywheel 4 for a manual transmission or drive disk 5 with disk 2 for an automatic transmission. The cylindrical pin centers the flywheel or drive disk. The flywheel or drive disk is balanced individually and can be replaced without balancing.
Original published on the website MercedesMan
Installation
6. Installation is carried out in the reverse order of removal.