Contents: Removal ↡ Installation ↡
Removal
1. Remove the radiator 1 (see figure 3.33).
Figure 3.33. Cooling system fan:
1. Radiator,
2. Retaining gasket,
3, 7. Nut,
4. Blade wheel,
5. Fan drive,
6. Wiring connector,
8. Bolt.
2. Unscrew the nut 3. Replace the gasket 2.
3. Remove impeller 4.
4. Disconnect connector 6.
5. Unscrew nuts 7 securing fan drive 5 and remove drive 5.
Installation
6. Installation is carried out in the reverse order of removal. Make sure that impeller 4 is correctly installed on bolt 8.