Removing
1. Disconnect the negative cable from the battery.
2. Drain the coolant.
3. Remove the cross beam 1 (see fig.3.34a, fig.3.34b).
Pic. 3.34a. Radiator of the cooling system:
1. Cross beam,
2. Radiator grille,
3, 4. Bolt,
5. Receiver,
6. Collar,
7. Automatic transmission oil cooler,
8. Cooling system radiator,
Pic. 3.34b. Radiator of the cooling system:
9. Capacitor,
10. Wiring connector.
4. Remove the radiator grille 2.
5. Remove the metal clips of the condenser 9 to the radiator 8.
6. Remove the air inlet pipe.
7. Unscrew the bolts 3 of the clamps for fastening the pipes of the air conditioning system to the condenser 9.
8. Disconnect capacitor 9.
9. Disconnect the pipes of the cooling system from the radiator 8. Two - from above, one - from below.
10. Unscrew the bolt 4 fastening the receiver 5.
11. Disconnect the collar 6 fastening the receiver 5 to the bracket.
12. Disconnect the automatic transmission oil cooler 7 from the radiator 8.
13. Disconnect connector 10 on the fan shroud.
14. Remove the radiator 8. Do not damage the fingers of the radiator.
Installation
15. Installation is made in an order, the return to removal.