Details of installation of a radiator of a cooling system
Details of installation of the radiator of the cooling system on gasoline models of the M104.94 / 99 series
1 - Bottom protective shield; 2 - Upper transverse beam; 3 - Capacitor; 4 - Radiator; 5 - Fan casing; 6 - Casing ring; 7, 8 - Oil pipelines АТ; 9, 10, 11, 12 - Branch pipes of the cooling system; 13 - Plastic tapes; 14, 15, 18 - Clips; 19 - Rubber supports; 20 - Lever; 21 - Adjusting bolt
Installation details of the cooling system radiator on diesel models of the OM603.971 series
1, 2, 2a, 4, 15, 16 - Clips; 5 - Fingers; 6, 7 - Panels; 8 - Clamp; 9 - Radiator; 10, 14 - Branch pipes of the cooling system; 11 - Fan casing; 17 - Ring; 18 - Lid
Withdrawal (on the example of a diesel model with an engine of the OM606.961 series with AT)
Installation details of the cooling system radiator on diesel models of the OM606.961 series
1. Remove the bottom motor guard.
2. Drain the coolant.
3. Remove the compressed air supply pipe (110).
4. Remove the clips (15) And (16).
5. Remove the fan clutch.
6. Remove the fan shroud.
7. Disconnect AT pipes (13) And (14) from the radiator.
8. Disconnect the fittings (10), (11) And (12).
9. Remove the front cross member (2).
10. Remove the radiator (10).
Installation
Installation is carried out in the reverse order of removal.