Removing
1. Drain the coolant.
2. Remove ignition coil 1 (see fig.3.39).
Pic. 3.39. Circulation pump:
1. Ignition coil,
2. Adapters,
3. Circulation pump,
4. Connector,
5. Rubber support.
3. Disconnect the pipes of the cooling system from the adapters 2 of the circulation pump 3.
4. Disconnect the connector from the circulation pump 3.
5. Remove the circulation pump 3 from the rubber supports 5.
Installation
6. Installation is made in an order, the return to removal.