Removal fuel supply system pipes and hoses (Mercedes-Benz E-Class W210)

These pipes and hoses are made of special pressure-resistant material and are secured at the connection points with clamps, screws or compression clamps.

Sequence of works

1. When disconnecting the clamp, use pliers to press the clamp ring in a circular direction (in this case the clamping clamp will be lengthened) and disconnect the hose with a rotating motion. Or use a narrow screwdriver to slightly bend the clamp ring.

2. Place a small open-end wrench on the end of the hose and squeeze the hose.

3. When connecting hoses, use clamps with screw connection.

4. Clamps with screw connection can be used repeatedly. When tightening, do not apply force - you can strip the threads.