Contents: Removal ↡ Installation ↡
Removal
Air flow meter
1 – electrical connector;
2 – spring clamp;
3 – clamp
1. Remove the ground cable from the battery.
2. Disconnect the electrical connector from the sensor by turning the connector ring counterclockwise and pulling the connector out of the socket (see picture).
3. Loosen the hose clamp on the engine side of the air flow meter and remove the hose. Release the spring clips on the air filter side of the air flow meter and remove the air flow meter. Remove the sealing ring.
Installation
1. Installation is performed in the reverse order of removal. Before installing the sealing ring, lubricate it with a thin layer of engine oil.