Starter pull relay wires
1. Jack up the front of the vehicle and place it on jack stands (stand). Apply the parking brake.
2. Disconnect the wire from the negative battery terminal.
3. Disconnect wires from the traction relay. To do this, unscrew the nut, remove the power wire and undock the control circuit wires from the terminals.
4. Turn away bolts of fastening of a starter to an intermediate plate and an arm, remove a starter, lowering it down. A socket wrench is needed to loosen the top mounting bolt.
5. Installation of a starter is made in an order, the return to removal. All bolts are first tightened by hand and then tightened with a wrench.