Front rear suspension mount | Removing the front rear suspension mount |
1. Place wedges under the front wheels, raise the rear of the vehicle and place it on a stand.
2. Place a trolley jack under the cross beam.
3. Turn away bolts of fastening of an adjusting plate to the bottom of a body and a cross beam.
4. Remove the rubber bushing of the mount, for which slightly wring it out and remove it with two screwdrivers.
5. Moisten a new rubber bushing with soapy water and insert it into the crossmember beam. If installation is difficult, use a long bolt and nut with washers for this.
6. Replace the mounting plate and tighten the bolts.
7. Lower the car.