Removing
1. Disconnect the negative cable from the battery.
2. Remove the right front wheel.
3. Disconnect the right half shaft (arrow) from the intermediate drive shaft (see fig.2.135).
Pic. 2.135. Generator:
1. D+ circuit connection,
2. B+ circuit connection,
3. Cover,
4. Bolt, G1. Generator.
4. Loosen the alternator drive belt.
5. Loosen the tension and fastening racks, fasten them to the side.
6. Remove cover 3.
7. Turn off bolts in connections 1 and 2 from the G1 generator.
8. Turn off bolts 4. The top bolt is screwed in an arm of fastening of the generator.
9. Remove generator G1.
Installation
10. Installation is made in an order, the return to removal.