In this mode, in combination with the vehicle's heating system, the interior can remain heated for some time after the engine has been switched off. The engine residual heat mode switch is located in the middle of the instrument panel. With the ignition key in position 0 or with the key removed:
Switching on: press the switch from above (the control LED on the switch is on and the fan operates at stage 1). Set the temperature switch to the required heating power.
Shutdown
- automatically: after approximately 30 minutes or when the battery voltage drops below normal;
- manually: press the switch again from above or turn the ignition key to position 2. Set the temperature regulator to the desired air temperature in the cabin.