Pic. 117. Location of the oil dipstick on a 2.3 liter engine (208D, 308D, 408D) | Pic. 118. Location of the oil dipstick (1) and lids (2) oil filler neck on a 2.9 liter engine (212D, 313D, 412D) |
The dipstick guide tube is located directly in the center of the front of the engine (see fig. 117 and 118). To remove it, remove the probe, unscrew the bolt at the top of the tube and remove it from the crankcase. A gasket is located at the bottom of the tube, which is replaced with each dismantling.
Pic. 132. Location of the identification number on the dipstick (shown by arrow)
Assembly is carried out in the reverse order. Tighten the tube mounting bolt to 10 Nm. If the tube and dipstick are replaced with new ones, pay attention to their suitability for the type of engine. On fig. 132 shows the number stamped on the dipstick. In case of replacement, the number on the new probe must match the old one.