Figure 332. Fastening parts of the electric motor and windshield wiper arms: 1 — plug; 2 - windshield wiper motor; 3 - Hex bolt; 4 - washer; 5 - hex nut; 6 - windshield wiper rods; 7 - crank mechanism on the electric motor shaft
- open the hood and disconnect plug 1 (figure 332) from the wiring block;
- use a screwdriver to press both rods 6 from the crank mechanism 7, being careful not to bend the lever and rods;
- unscrew the hex nut from the motor shaft, remove the washer and, having marked the position, remove the lever;
- unscrew three bolts 3 and remove the windshield wiper motor.
Installation is carried out in reverse order. The traction should be put back on the fingers from which they were removed. After installation, check the system operation.