Windshield wiper arm installation details
1. The installation details of the windshield wiper arms are shown in the illustration to which all references in the text refer.
2. Make sure the brushes are stopped in the parking position.
3. Remove the protective cap (1), loosen the mounting nut (2) and remove the wiper arm from the drive spindle, being careful not to break the windshield.
4. Installation is carried out in the reverse order - make sure that the brush is in the parking position.
Rear window
Parking position of the rear window wiper lever |
Rear Window Wiper Arm Installation Details |
Material based on data from the portal MercedesMan.ru
1. The installation details of the rear window wiper arm are shown in the illustrations to which all references in the text refer.
2. Make sure the brush is stopped in the parking position.
3. Open the cover (1) and loosen the fastening nut (2), - try not to damage the washer fluid supply nozzle
4. Remove the lever from the drive motor shaft.
5. Installation is carried out in the reverse order - make sure that the brush is in the parking position.