Sequence of works
1. Open the hood.
2. Place pieces of cloth under the rear corners of the hood to prevent it from slipping and damaging body parts or paintwork.
3. Disconnect the heated washer nozzle hose and wire. To do this, remove the plugs from the inside of the hood.
4. First, unscrew one hinge mounting bolt on the right and left sides.
5. Loosen the tightening torque of the bolts.
Fig. 11.2. Before unscrewing the hinge mounting bolts (arrows), mark their position with a felt-tip pen
6. Ask two assistants to hold the hood on both sides, then unscrew the loosened bolts completely and remove the hood (Fig. 11.2).