1. Turn on the right turn signal,
2. Turn on the left turn signal.
For short-term flashing, press the switch until it stops. For continuous flashing, press the switch past the stop (until it clicks).
Attention! If the bulb in the turn signal of the vehicle or trailer fails, the indicator light of the turn signal will flash at an increased frequency.
3. Headlight switch.
It has the following provisions:
side lights, number plate and instrument panel lighting;
low and high beam;
right parking lights (combination switch up to locking point), left parking lights (combination switch down to the locking point).
4. High beam headlights. Switch position
.
5. Light signaling (also works when the turn signals are on).
Caution! If the ignition key is in position 0 and the doors are open, then with the exterior lighting on (except for parking lights) a sound signal is heard.