1 - Dipped beam (light rotary switch position ).
2 - high beam (light rotary switch position ).
3 - Light signal (main beam regardless of the position of the light rotary switch).
4 - Turn right.
5 - Turn left.
In cases 4 and 5, the combination switch is fixed.
Reverse switching occurs automatically with large movements of the steering wheel.
For small changes in direction, just press and hold the combination switch.
6 - Turn on:
- windshield washer
- headlamp cleaner (only with positions or of light rotary switch).
When turned on, the wipers will also work.
The washer nozzles will automatically heat up.
7 - Turning on the wipers
- O - wipers off;
- I - washing with intervals;
- II - normal washing mode;
- III - fast washing mode.
Example: When turning off the turns, there is a quick blinking and sounding of a signal.
If the turn on the vehicle or on the trailer does not light up when using a trailer, the indicator light for the trailer mode may not light up or light up 1 time.
When using wipers on the windshield, various defects can form. In this case, as well as in case of rain, it is necessary to turn on the windshield washers. The windshield washer fluid reservoir must always contain a windshield washer mixture suitable for the vehicle MB from concentrate S (Sommer) or W (Winter - winter).