Pull the lock regulator down and turn it half a turn until it stops. Set the hatch in the desired position and to fix it, turn it in the opposite direction until it stops and push it up.
Attention! For safety reasons, the lock regulator must be fixed in the upper position after each installation of the hatch.
The key in the ignition switch is in position 1 or 2.
The switch can be used to:
- open the hatch;
- close;
- raise;
- lower.
With the vehicle's external lighting on (except for parking lights) the switch is also illuminated.
If the electrical wiring is damaged, the hatch can be raised by slightly moving it manually.