Gas engine
Removing
1. 1.8L and 2.0L Engine: Loosen Clamp (4/8) and remove from the air filter (4) air hose.
2. 2.2L and 2.8L Engines: Remove from Air Filter (4) the flow meter together with the air hose, having previously opened the fastening clamp on the air filter nozzle. Check the O-ring for damage.
3. Remove the inlet pipeline (4/16).
4. Pull the air filter out of the rubber mounts (arrow) and take it off.
Installation
1. Insert the air filter with retaining tabs into the rubber mounts (arrows). Fit the inlet pipe (4/16).
2. 1.8 and 2.0 liter engines: fit the air hose onto the air filter and secure it with a clamp.
3. 2.2 and 2.8 liter engines: insert the flow meter with O-ring and secure it with the clamp.
Diesel engine
Removing
1. Remove the clip spring from the hose from the coolant reservoir to the air filter.
2. Remove the air hose from the air filter by first loosening and sliding the clamp back.
3. Remove the suction air intake.
4. Remove the air filter from the rubber mounts and remove it.
Installation
1. Insert the air filter together with the guide pins into the rubber supports.
2. Fit the suction air intake.
3. Slide the air hose from the coolant reservoir to the air filter over the air filter.