Contents: Removal ↡ Installation ↡
Removal
1. Remove the air filter 1 (see figure 4.50).
Figure 4.50. Turbocharging:
1. Air filter,
2. Air intake pipe,
3. Upper compressed air supply tube,
4. Turbocharging,
5. Self-locking nut,
6. Compressed air supply tube,
7. Front part of the exhaust pipe,
8. Lower compressed air supply tube,
9. Oil pipeline,
10, 12. Oil drain line,
11, 13. Bolt,
14, 15. Fixators.
2. Remove the air inlet pipe 2, the upper 3 and lower 8 compressed air supply pipes, pipe 6.
3. Remove the front part of the exhaust pipe 7.
4. Disconnect the oil drain line 12 from the cylinder block.
5. Disconnect the oil drain line 10 from the turbocharger 4.
6. Disconnect oil line 9 from cylinder block and turbocharger 4.
7. Disconnect turbocharger 4 from the exhaust manifold and remove it.
Installation
8. Installation is carried out in the reverse order of removal. Replace retainer 14 and gasket 15, self-locking nut 5.