Removing
Details of installation of a tensioner of a belt of a drive of the generator
A - Tensioner 1st version; 355 - Cover; 356 - Bolt; 357 - Retaining gasket; 360 - Tension lever; 362 - Sleeve; 30 - Finger; B - Tensioner 2nd version; 356a - Bolt; 360a - Tension arm; C - Tensioner 3rd version; 2 - Bolt; 4 - Bushing; 9 - Cover; a - Seal
1. Remove the fan clutch.
2. Remove the fan shroud.
3. Remove the alternator drive belt.
4. Press out the cover (368).
5. Remove the tension roller (366).
6. Unscrew the pulley (346) cooling system pump.
7. Remove shock absorber (370).
8. Loosen the nut (378) and disconnect the tension spring (376).
9. Remove front cover (355).
10. Remove the bolt (356) and remove the tension lever (360).
11. Remove your finger (360).
12. Remove the bolt (356a) and remove the tension lever (360a).
13. Remove front cover (9).
14. Remove the bolt (2) and remove the tension lever.
Installation
Installation is carried out in the reverse order of removal.