Mechanical window regulator
1. Remove the cover (four screws), remove the circlip and disconnect the intermediate lever and guide plate.
2. Raise the glass and support it with a block of wood.
3. Turn away bolts of fastening and remove a window regulator through an aperture.
4. Installation is made in an order, the return to removal.
Electric window regulator
1. Push out the rocker switch and undock the wiring connector. Disconnect the motor wiring from the terminal block as well, noting the position of the wires.
2. Turn away screws of fastening and remove both covers.
3. Turn away fastening and remove an overlay.
4. Take out a lock ring and disconnect the intermediate lever from a directing plate.
5. Turn away nuts of fastening of a window regulator, lower glass and remove a window regulator through top.
6. Installation is made in an order, the return to removal.