Contents: Coupe models ↡ Station wagon models ↡
Removing the rear side window glass
Coupe models
1. Remove the rear seat.
2. Remove the trim (three screws), window handle or power window switch, trim and rear panel.
3. Unscrew the fastener, remove the cover plate and covers, and then disconnect the intermediate lever and guide plate.
Original article is on the portal (mercedesman.ru)
4. Unscrew the guide post fastening and remove the glass from the car, pushing it forward.
5. Install in the reverse order of removal, adjusting the position of the glass after loosening the corresponding bolts.
Station wagon models
The operations are the same as those listed above, except that you must first remove the corresponding trim panels.