Removing
1. Disconnect the negative cable (-) battery with the ignition off. The cabin air filter box must first be removed.
Attention! Before disconnecting the cable, find out the security code of the radio, if any, refer to Section Replacing the battery.
2. Remove the cover of the fuse block on the side of the instrument panel, refer to Section Relays and fuses.
3. Remove the handle from the instrument panel (1) release the parking brake, remove the 2 screws (2) and push the handle down.
4. Loosen the lock screw (3) switch groups.
5. Compress the 2 retaining springs and remove the switch group (2) from the instrument panel.
6. Loosen the connecting plug on the back of the switch group and disconnect it.
7. Disconnect the light range control from the holder at the group of switches and move it to the side.
Installation
1. Installation is carried out in the reverse order of removal.
2. Connect ground cable (-) battery with the ignition off. Install the cabin air filter box. If necessary, enter the radio code and set the time on the clock.