Contents: Removal ↡ Installation ↡
Electrohydraulic control unit AT
2 - Gearbox; 3 - Pallet; 3a - Connector; 3b, 19a - Bolts; 4 - Drain plug; 5 - Oil filter; 19 - Electrohydraulic control unit; 21 - Guide bushing; 26 - 13-pin connector; 62 - Shield; a - Speed sensor hole n3 (Y3/6/2); b - Hole for speed sensor n2 (Y3/6/2)
Removal
1. Set the gear selector lever to position "P".
2. Remove shield 62 and disconnect 13-pin connector 26.
3. Loosen guide sleeve 21 and remove it from the transmission.
4. Drain the transmission fluid by unscrewing plug 4.
5. Remove the tray 3.
6. Remove the oil filter 5.
7. Unscrew bolts 19 and remove electrohydraulic unit 19.
Publication taken from an online resource mercedesman.ru
Installation
Installation is carried out in the reverse order of removal.