Contents: Front bumper ↡ Rear bumper ↡
Front bumper
Removal
1. Insert a plastic wedge between the protective strip (1) and the bumper and remove the fastening hook (2) from the bumper.
Note: The mounting hook must be removed from the vehicle side first.
2. Remove the protective strip using a plastic wedge at the fasteners (3) and remove it from the bumper.
Installation
1. Place the protective strip on the bumper and insert the fastening hooks.
2. Press the protective strip to the bumper and fix it.
Rear bumper
Note. Removing and installing the protective strip on the rear bumper is similar to removing and installing the protective strip on the front bumper. On the Sedan and Sports Coupe models, the protective strip consists of three parts and is secured on the sides with an additional screw. When removing, first unscrew this screw.
Removal
1. Sedan and Sports Coupe: Remove the bolt (1) in the wheel arch. (2) – clamping nut.
2. Remove the mounting hook from the bumper (3) using a plastic wedge.
3. Using a plastic wedge, release the protective strip (4) from the clips and remove it from the bumper.
Installation
Installation is performed in the reverse order of removal.