Removing
1. Disconnect the negative cable from the battery.
2. Disconnect the pipe of the cooling system 1 (see fig.4.37).
Pic. 4.37. Thermostat:
1. Pipe of the cooling system,
2. Bolt,
3. Thermostat,
4. Seal.
3. Disconnect the drain oil line from the cylinder block.
4. Turn off a bolt 2 fastenings of a cover of the thermostat 3 to the case of the pump of system of cooling.
5. Remove the thermostat cover.
Installation
6. Installation is made in an order, the return to removal. Replace seal 4, gasket and oil drain seal.