Removing
1. Drain the coolant.
2. Remove the air filter.
3. Loosen the bolts 1 fastening the pulley 2 of the cooling system pump 4 (see fig.4.36).
Pic. 4.36. Coolant pump:
1, 3. Bolt,
2. pump pulley,
4. Coolant pump,
5. Adjusting sleeves,
6. Gasket,
7. Shock absorber,
8. Tension lever.
4. Remove the alternator drive belt.
5. Remove the pulley 2 of the cooling system pump 4.
6. Disconnect the shock absorber 7 of the tensioner from the cylinder head. The damper 7 can remain attached to the tension arm 8.
7. Remove the pump 4 of the cooling system by unscrewing the bolts 3.
Installation
8. Installation is made in an order, the return to removal. Wipe the sealing surfaces and replace the gasket 6. Bolt must be inserted before installing the pump (arrow).