39 - Gasket; 40 - Bolts (4 pieces); 97 - Intermediate lever; S16/10 - Gear identification switch; S16 / 10s2 - Switch for reversing lights; Y66/1 - Solenoid actuator for locking positions «R/P»
AT control drive
1 - Cable of the central block of gear shifting; 2 - Gear lever handle; 3 - Gear indicator control unit; 4 - Central gearshift unit; 5 - Tip of the switching rod; 6 - Gearshift rod; 7 - Pin for connecting rod
Removing
1. Remove shift lever from intermediate lever (97).
2. Remove the center console.
3. Remove the bolts (40).
4. Disconnect the connectors and the electromagnetic actuator of the position lock «R/P» (Y66/1) from the identification switch (S16/10), reversing light switch (S16/10S2).
5. Remove the gear selector lever assembly from the floor.
Installation
Installation is carried out in the reverse order of removal. Check for correct installation of the gasket (39) and its condition, if necessary, replace it.