Selector Lever Trim Cover Installation Details (for models produced up to 31.08.01)
1. The relevant illustrative material is presented in the illustration, to which all references in the text refer.
2. Pry off the plastic frame (1).
3. Remove the pinned panel (2) of the front storage compartment.
4. Remove the two mounting screws in the bottom of the glove box (3) and remove the latter from the console assembly.
5. Using a suitable wedge, release the cover (4) from the console assembly.
6. Disconnect the electrical wiring connectors (5) of the console switch group (S21) and finally remove the cover (4).
7. Installation is carried out in reverse order.