Installation Details for Front Footwell Trim Panels
3 - Finishing panel of the driver's foot well; 4 - Panel for finishing the passenger footwell; 7 - Clips
1. The relevant illustrative material is presented in the illustration, which includes all references in the text.
2. Remove the door sill cover of the relevant door (1) (see Section Removal and installation of overlays of door thresholds).
3. Turn out from an overlay of a threshold two forward screws.
4. Peel off the bottom front corner of the door seal (2).
5. When working in the driver's footwell, remove the bolt (5) bonnet latch release lever (6) to the A-pillar. Disconnect the drive cable and remove the lever (6).
6. When removing the passenger well trim, release by turning 1/4 turn counterclockwise and bringing to a vertical position, the latches of the cover of the cabin fuse and relay mounting block (8), then give the nut (9).
7. After releasing the remaining latches, remove the trim panel (3 or 4), if necessary, raise the sill trim slightly.
8. Installation is carried out in the reverse order.