Removing
1. Disconnect the negative cable (-) battery with the ignition off. The cabin air filter box must first be removed.
Before disconnecting the cable, find out the security code of the radio, if any, refer to Section Replacing the battery.
2. Insert the plastic wedge (1) back lining (2) and detach the trim from the window frame.
3. Disconnect the tweeter connector (refer to illustration).
Installation
1. Position the trim against the window frame and press it under the sealing lip.
2. Press the pad in front and fix the holders, while the hook (1) must fit under the window frame trim.
3. Connect the negative cable (-) to the battery when the ignition is off. Install the cabin air filter box. Enter the radio code and set the time on the clock.