Removing
1. Open the trunk.
2. Using a plastic wedge, remove the trim (1) at the luggage compartment cover. Station wagon: Remove the plug, refer to the appropriate section.
3. Mark the position of the lock latch with a felt-tip pen.
4. Turn out 2 bolts of fastening (2) and remove the latch.
Installation
1. Install the lock retainer in accordance with the mark and tighten the fastening bolts by hand.
2. Close the trunk and check the position of the latch. In this case, the edges of the trunk lid and the wings of the body must match. If necessary, move the latch slightly so that the trunk is properly closed.
3. Tighten the fastening bolts to a torque of 10Nm and install the trim into the trunk lining.